dsc03945.jpg

POLLS

What do you like in the e-puck robot?
 
Print
Written by Administrator   
Wednesday, 24 November 2010 13:06

Tutorial

Development on the e-puck can be learned through the tutorial available in the Download->Documentation section.

Libraries

We have developed few simple libraries allowing to access to the hardware features. The following libraries are available:

  • e-puck initialisation of basic hardware features
  • management of proximity sensors
  • motor speed control
  • leds management
  • accelerometer reading
  • microphone sampling
  • sound emition
  • image acquisition

Release versions of the libraries are available at the Download->Software->Library page.

Development versions of the libraries are available at gna. If you want to take part in their development, you can join the development mailing list.

Bootloader

We have a bootloader that works through bluetooth.

ASEBA

The ASEBA architecture allows to run scripts into the e-puck microcontroller keeping a good control on the code, allowing easy debugging and visualization of key variable and sensor data. A bridge between ASEBA and ROS has been implemented and allows a link with one of the most well known robotic programming environments.

Debug

Hardware online debug has to be done using an external programmer ICD2 from Microchip. But you can manage doing simple debuging by sending information trough bluetooth.

Communication protocol

We have implemented a serial communication protocol to control the e-puck via a serial RS232 line or bluetooth. This allows simple experimentation with code developed on a PC.

Demonstrations

We have a set of demonstration illustrating the use of several sensors of the robot in several typical applications.

Last Updated on Saturday, 05 March 2011 09:06
 
e-puck education robot, Powered by Joomla!